Structural Mechanics Lab Manufacturer, Suppliers and Exporter in India

Behaviour of Column and Struts Apparatus

Product Code : EL-SML-12099

Apparatus with four spring steel columns on a vertical wooden board, with pinned, fixed and free end conditions, supplied with stand and weights.

Note:

Curved Member Apparatus

Product Code : EL-SML-12100

Steel bar curved members (circle, semicircle and quadrant forms) with dial gauges for horizontal and vertical deflection under a load at the free end.

Note:

Deflection of Truss Apparatus

Product Code : EL-SML-12101

Pratt steel truss with 4 panels of 40 cm by 30 cm, detachable springs in the tension members and alterable diagonals, to show the forces in the members.

Note:

Elastically Coupled Beam Apparatus

Product Code : EL-SML-12102

Mild steel suspension system of three parallel bars with elastic beams at the top and lower ends, supplied with a supporting stand and weights.

Note:

Elastic Properties of Deflected Beam Apparatus

Product Code : EL-SML-12103

Steel beam of 2.5 cm x 3 mm section and 100 cm length on two supports 70 cm apart, with known end moments, vertical loads and a dial gauge.

Note:

Elastic Properties of Deflected Beam Apparatus

Product Code : EL-SML-12104

Elastic Properties of Deflected Beam Apparatus

Three Hinged Arch Apparatus

Product Code : EL-SML-12105

Mild steel three hinged arch, 100 cm wide and 25 cm long, with hinges at supports and top and a roller end, for measuring horizontal thrust.

Note:

Refrigeration Trainer - General Cycle Type

Product Code : EL-SML-12106

Trainer that displays the components and general working cycle of a refrigeration system, with measurements to study performance. Compressor 0.3 T.

Note:

Air Conditioning Trainer - General Cycle Type

Product Code : EL-SML-12107

Air conditioning trainer with ducting, axial flow fan, heaters, cooling coil and steam humidifier connection, and a cooling circuit with a hermetic compressor.

Note:

The ice plant trainer

Product Code : EL-SML-12108

Refrigeration trainer on the ice can system: cans of water in circulating brine, cooled by refrigerant, make 7 kg of ice in 4 hours.

Note:

Water Cooler Trainer

Product Code : EL-SML-12109

Refrigeration trainer with a stainless steel storage water tank holding the evaporator coil, for studying COP, power consumption and cooling capacity.

Note:

Mechanical heat pump trainer

Product Code : EL-SML-12110

Heat pump trainer with a refrigeration system, a water cooled shell and coil evaporator, a continuous water flow condenser and a 0.3 ton compressor.

Note:

Domestic Refrigerator

Product Code : EL-SML-12111

Cut section model of a domestic refrigerator built with original parts, painted and mounted on a wooden base, with literature on its working principle.

Note:

Rotary Compressor

Product Code : EL-SML-12112

Cut section model of a rotary compressor built with original parts, painted and mounted on a wooden base, with literature on its working principle.

Note:

Handheld Anemometer Digital

Product Code : EL-SML-12113

Handheld digital anemometer for measuring wind or air velocity, placed in front of the air vent of a window air conditioner to record the air velocity.

Note:

Wet and dry thermometers

Product Code : EL-SML-12114

Pair of thermometers, one with a wet bulb and one kept dry, used to measure the relative humidity of the atmosphere from the difference in readings.

Note:

Jaw Crusher

Product Code : EL-SML-12115

Jaw crusher for various crushing applications, with a 220 V AC power supply and a weight of 120 kg.

Note:

Lab Testing Machine

Product Code : EL-SML-12116

Lab Testing Machine Lab Testing Machine Owing to the rich experience in this domain, we have been able to offer optimum quality Lab Testing Machine to our esteemed customers

Brake Roller Bench

Product Code : EL-SML-12117

Teaching bench with a 1300 mm storage channel, roller brake, loadable pallet, speed sensors and a strain gauge force sensor with data acquisition.

Note:

Capillary Tube Viscosimeter

Product Code : EL-SML-12118

Apparatus for Poiseuille flow and the dynamic viscosity of liquids at constant temperature, with 0.2 and 0.4 mm capillary tubes and a thermostatic vessel.

Note:

Closed Circuit Subsonic Wind Tunnels Closed Circuit

Product Code : EL-SML-12119

Compact closed circuit subsonic wind tunnel with a transparent test section, a variable speed fan and a velocity range of 2 to 40 m/s, for aerodynamics experiments.

Note:

Falling Sphere Viscosimeter

Product Code : EL-SML-12120

Wall-mounted falling sphere viscosimeter with two transparent tubes, a set of balls and a stop watch, used to find liquid viscosity and the drag coefficient of spheres.

Note:

Flow Visualization Wind Tunnel

Product Code : EL-SML-12121

Combined wind tunnel and smoke generator with a 25 x 250 x 250 mm test section and 10 m/s wind speed, for studying air flow around models with smoke traces.

Note:

Subsonic Suction Wind Tunnel

Product Code : EL-SML-12122

Bench-mounted subsonic suction wind tunnel with a 230 x 230 x 500 mm test section and variable air speed up to 45 m/s, supplied with aerofoil, cylinder and manometer.

Note:

Water Hammer Demonstration Unit

Product Code : EL-SML-12123

Rig with an 11 m stainless steel coil, pneumatic valve and pressure transducers to demonstrate water hammer and cavitation and to calculate the speed of sound in water.

Note:

Bucket Conveyor

Product Code : EL-SML-12124

Laboratory-size centrifugal discharge bucket conveyor with small buckets on a belt, motor with reduction gearbox, feed hopper and two bins, for studying vertical conveying.

Note:

Ball Mill

Product Code : EL-SML-12125

Horizontal rotating steel chamber, 275 mm x 350 mm, with steel balls, three-speed drive, revolution counter and energy meter, for size reduction experiments.

Note:

Belt Conveyor

Product Code : EL-SML-12126

Laboratory belt conveyor with a 200 mm wide, 1500 mm long nylon or synthetic belt, motor with reduction gearbox and two bins, for studying conveyor working and belt inclination.

Note:

Rotap Sieve Shaker

Product Code : EL-SML-12127

Motor-driven sieve shaker with circular and tapping motion for a stack of six 20 cm test sieves, with a 0 to 60 minute time switch. Test sieves are supplied separately.

Note:

Simple Pendulum

Product Code : EL-SML-12128

Wall-mounted simple pendulum with a sliding bob, knife edge bracket, stopwatch and rule, used to find the acceleration due to gravity and verify the equation of motion.

Note:

Crank And Connecting Rod Apparatus

Product Code : EL-SML-12129

Benchtop unit showing conversion of rotary into reciprocating motion, with an anodised aluminium crank disc, angle and millimetre scales and adjustable crank radius and rod length.

Note:

Oldham Coupling

Product Code : EL-SML-12130

Hand-operated Oldham coupling model on a base, showing transmission between two shafts that are not coaxial. Available in small and big sizes.

Note:

Slotted Link Apparatus

Product Code : EL-SML-12131

Demonstration model that generates pure harmonic reciprocating motion, with an anodised aluminium crank disc, pointer and angle scale and a ruler on the straight guide for the stroke.

Note:

Whitworth Quick Return

Product Code : EL-SML-12132

Whitworth quick return mechanism model, one of sixteen built on an A3 board, with plastic links on hollow rivets and a white melamine board for classroom and lab use.

Note:

Level Measurement Trainer

Product Code : EL-SML-12133

Trainer with a capacitive level transmitter in a transparent 300 mm acrylic tank, digital indicator 0-300 mm with 0.1 mm resolution and 24 V DC supply.

Note:

Epidiascope

Product Code : EL-SML-12134

Multipurpose epidiascope working as an episcope, slide projector and 35 mm filmstrip projector, with an AC motor driven blower to exhaust heat.

Note:

MG Set Lab Equipment

Product Code : EL-SML-12135

Motor-generator set for electrical machines laboratories, in 1 phase and 3 phase ratings at 0.8 power factor, for synchronous machine reactance tests.

Note:

Model of Corliss Valve Steam Engine

Product Code : EL-SML-12136

Sectional demonstration model of a Corliss valve steam engine with four oscillating valves, a wrist plate and aluminium cast parts on a polished wooden board.

Note:

Model Of Piston Valve Steam Engine

Product Code : EL-SML-12137

Cut-way demonstration model showing the working of a piston valve steam engine, with metallic parts fitted on a polished wooden board of about 50 x 30 cm.

Note:

Steam Engine Model with a Boiler

Product Code : EL-SML-12138

Extra large working steam engine model with a horizontal boiler, whistle, safety valve, steam gauge, heating lamp and a small dynamo model.

Note:

Air Conditioning Unit

Product Code : EL-SML-12139

Instrumented, upgradeable air conditioning unit on a steel frame with castor wheels, with a 250 mm square duct, humidifier, heaters, cooling coil and orifice plate.

Note: