Testing Equipments Manufacturer, Suppliers and Exporter in India

Sole Adhesion

Product Code : EL-TE-13208

Sole adhesion tester for footwear with a spring dynamometer reading in kilograms, five interchangeable toe pieces and an adjustable fulcrum.

Note:

Toe Cap Impact Tester

Product Code : EL-TE-13209

Toe cap impact tester on a horizontal platform with two guide bars, a mild steel plunger and a capsule to measure clearance at maximum depression.

Note:

Belt Flex Tester

Product Code : EL-TE-13210

Belt flex tester for complete footwear soles, with a continuous belt on two rollers, three flexing rollers and a motor and V belt drive.

Note:

Bennewart Flex Tester

Product Code : EL-TE-13211

Bennewart flex tester for footwear outsoles, with an oscillating grip drive, swayable ball bearing grip bases and a six digit pre-set counter.

Note:

Vibration Table

Product Code : EL-TE-13221

Vibration table for package testing. It simulates transport vibration to assess the strength of filled packages or furniture and protection of contents.

Note:

Gloss Meter

Product Code : EL-TE-13222

Gloss meter for gloss and brightness of materials, in single angle (60 deg) and three angle (20, 60, 85 deg) models with a 0-200 GU range.

Note:

Moisture Meter

Product Code : EL-TE-13223

Electrical resistance type digital moisture meter with thin pins for materials up to 25 mm thick and a 5 to 20 % moisture range.

Note:

Exposure Rack

Product Code : EL-TE-13256

Exposure rack for the colour fastness of textile fabrics to daylight, with a wooden frame and glass framed lid on a steel stand tilted at 45 deg.

Note:

Pressure Head Tester

Product Code : EL-TE-13257

Pressure head tester (hydrostatic head tester) with a ring clamp over a water well, digital pressure display, compressed air line and preset timer.

Note:

Tensile Strength Tester

Product Code : EL-TE-13258

Tensile strength tester to determine tensile strength and elongation of metals, foam, rubber, textiles, plastic, paper, wires, ropes, yarns and belts.

Note:

Schildknecht Flex Tester

Product Code : EL-TE-13259

Schildknecht flex tester with two fixed grips and a large reciprocating grip, a motor and V-belt drive and a six digit electronic preset counter.

Note:

Indentation Hardness Tester

Product Code : EL-TE-13260

Indentation hardness tester for foam, PU foam, rubberized coir and latex foam, with a shear beam load cell and digital compression and load readouts.

Note:

Ball Resilience Tester

Product Code : EL-TE-13261

Ball resilience tester for polyurethane foam. A metallic sphere is dropped from 500 mm in an acrylic tube, with levelling screws and a hand release.

Note:

Tensile Testing Machine

Product Code : EL-TE-13262

Tensile testing machine for tensile strength and elongation of rubber, leather, fabric, plastics, belts and wires, with a load cell and digital indicator.

Note:

Fogging Tester

Product Code : EL-TE-13263

Fogging tester for fogging characteristics or VOCs of leather, plastics, vinyl and textiles, with a heated bath up to 130 deg C, cooling plates and glass plates.

Note:

Salt Spray Chamber

Product Code : EL-TE-13264

Salt spray chamber to check corrosion resistance of surface coatings in a salt environment, with atomising nozzles, double walled chamber and digital timer.

Note:

Coating Thickness Gauge

Product Code : EL-TE-13265

Coating thickness gauge for dry film thickness of chrome, galvanizing, electroplating and paint on ferrous workpieces. Range 0-1000 um, magnetic induction.

Note:

Horizontal Flammability Tester

Product Code : EL-TE-13266

Horizontal flammability tester for motor vehicle interiors: stainless steel box 385 x 204 x 356 mm with Bunsen burner, digital preset timer and needle valve.

Note:

Computerized Universal Testing Machine

Product Code : EL-TE-13267

Computerized universal testing machine for tension and compression tests, with 10 to 100 kN load frames, digital load and displacement and a computer link.

Note:

Computerized Brinell Hardness Testing Machine

Product Code : EL-TE-13268

Computerized Brinell hardness testing machine with 250 to 3000 kgf test loads, automatic hydraulic loading, dwell time setting and image analysis.

Note:

Digital Impact Testing Machine

Product Code : EL-TE-13269

Digital impact testing machine for Charpy (300 J) and Izod (170 J) tests, with a digital energy readout, printer facility and test selection switch.

Note:

Reversion Test Apparatus

Product Code : EL-TE-13270

Reversion Test Apparatus (Oil Bath Type)

Analogue Compression Testing Machine

Product Code : EL-TE-13271

Analogue compression testing machine for cubes and cylinders, with a self-aligning platen assembly, kN load gauges and a safety door with overload tripping.

Note:

Concrete Mixer Pan Type

Product Code : EL-TE-13272

Portable, compact pan type concrete mixer with adjustable blades, 40 litre mixing capacity and a 2 HP, 3 phase, 960 rpm motor.

Note:

Cone Drop Test Apparatus

Product Code : EL-TE-13273

Cone drop test apparatus for geosynthetics and geotextiles: a 1 kg brass cone of 45 degree included angle dropped from 500 mm onto a clamped sample.

Note:

Core Case

Product Code : EL-TE-13274

Core Case portable concrete coring set with a 700 W percussion hand drill, feed assembly, anchor bolts and clamping pliers. Core bits are ordered separately.

Note:

Digital Compression Testing Machine

Product Code : EL-TE-13275

Compact hydraulic compression testing machine with a 4-digit kN load display, pace rate bar graph and two-speed pump. Stores readings from up to 1000 complete runs.

Note:

Flexure Testing Machine

Product Code : EL-TE-13276

100 kN hydraulic flexure testing machine for beams, with a manual double action pump or an electric pumping unit with a 1 HP motor for 415 V, 3 phase supply.

Note:

Geotextile Permeameter

Product Code : EL-TE-13277

Geotextile permeameter with a 73 mm specimen holder, 60 litre water tank and level gauges for falling head and constant head tests. A 100 mm holder is optional.

Note:

Hydraulic Jack

Product Code : EL-TE-13278

Hydraulic jack in capacities from 50 kN to 2000 kN, piston dia 50 mm to 215.4 mm. A hand operated pump with a 150 mm dia load gauge is the essential accessory.

Note:

Interface Friction Measurement Apparatus

Product Code : EL-TE-13279

60 x 60 x 25 mm assemblies for interface friction tests by the modified direct shear and pullout methods. Fit a conventional direct shear frame, ordered separately.

Note:

Moulding

Product Code : EL-TE-13280

Cast iron moulds for concrete specimens: 100 mm and 150 mm cube moulds, beam moulds, and split cylindrical moulds. A steel tamping rod is an optional accessory.

Note:

Portable Compression Testing Machine

Product Code : EL-TE-13281

1000 kN portable compression testing machine with a 165 mm square platen, 350 mm max vertical clearance, 220 mm horizontal clearance and 25 mm piston stroke.

Note:

Universal Testing System for Geotextiles

Product Code : EL-TE-13282

Geotextile testing machine with 100 kN and 10 kN load cells and a two channel 3.5 digit indicator. Grips and attachments are listed for tensile, tear and puncture tests.

Note:

Vibratory Compaction Vibrating Table

Product Code : EL-TE-13283

Vibrating table for compacting specimens in moulds, with a 500 x 500 mm table top and edge stops. Versions with 2 m x 1 m and 1 m x 1 m tops are also listed.

Note:

Impact Absorption Tester

Product Code : EL-TE-13284

Helmet tester that records the negative acceleration of a head-form dropped in guided free fall onto a steel anvil, with three accelerometers and data acquisition software.

Note:

Surface Roughness Tester

Product Code : EL-TE-13285

Pocket-size surface roughness tester that gives Ra and Rz readings on flat, outer cylinder and sloping surfaces, with external calibration at the keyboard.

Note:

Penetration Tester

Product Code : EL-TE-13286

Helmet penetration tester with a head-form holder of five degrees of freedom, guided metal punch and drop weight. Head-forms are optional accessories.

Note:

Elmendorf Tearing Tester

Product Code : EL-TE-13287

Pendulum tearing tester for the tearing strength of fabrics, papers and plastic films, with a brass sector pendulum, two clamps and a scale with pointer.

Note:

Ball Mill For Grinding Lime Mortar

Product Code : EL-TE-13288

Welded steel ball mill with a 12 inch x 13.5 inch drum, 28-30 r.p.m. speed, twelve 3/4 inch steel balls, revolution counter and a 1/2 HP motor.

Note:

Cylindrical Measures

Product Code : EL-TE-13289

Three calibrated sheet iron cylindrical measures with handles, of 3, 15 and 30 litres capacity, complete with a round tamping rod, 16 mm dia x 600 mm long.

Note:

Density Basket

Product Code : EL-TE-13290

Brass density basket with 6.3 mm stainless steel wire mesh, approximately 20 cm dia x 20 cm high, supplied complete with a handle.

Note:

Los Angles Abrasion Testing Machine

Product Code : EL-TE-13291

Abrasion testing machine with a horizontal drum on ball bearings, motor drive at 30-33 r.p.m., revolution counter, tray and twelve steel balls, approximately 48 mm dia.

Note:

Metal Measures

Product Code : EL-TE-13292

Metal measures with a handle, in 10 litre or 20 litre capacity, for determining the unit weight of aggregate.

Note:

Pendulum Impact Tester

Product Code : EL-TE-13293

Pendulum impact tester for Izod and Charpy tests, with two starting positions and the absorbed energy read from the maximum pointer on a dial scale.

Note:

Riffle Sample Divider

Product Code : EL-TE-13294

Sheet metal riffle sample divider on legs with equal width chutes that discharge material alternately into pans. Sizes 13, 25, 38, 50 and 63 mm.

Note:

Spring Testing Machine

Product Code : EL-TE-13295

Spring testing machine for load deflection tests on helical tension and compression springs, with a hydraulic unit, Bourdon type load gauge and graduated upright.

Note:

Thickness Gauge

Product Code : EL-TE-13296

Thickness gauge made of a frame with a sliding panel that has slots of different standard lengths and widths.

Note:

Crude Fiber Analyzer

Product Code : EL-TE-13297

Crude fibre analyzer for six test samples at a time, with a 90 min measurement time, 220 V AC 50 Hz supply and 3.3 kVA power.

Note:

Constant Temperature Refrigerated

Product Code : EL-TE-13298

Refrigerated liquid bath for 5 deg C to 90 deg C with a stainless steel chamber, PID digital controller (+/- 0.5 deg C), stirrer and circulating pump, 220/230 V AC.

Note:

Handheld GPS 72H

Product Code : EL-TE-13299

Handheld GPS 72H The Handheld GPS 72H is accurate to within 3 meters, has a relatively large screen and floats.

Elevator Portable Rope

Product Code : EL-TE-13378

Elevator Portable Rope Defectoscope We are lead