Engineering Equipment Manufacturer, Suppliers and Exporter in India

FIAT Turbo Diesel RWD Chassis

Product Code : EL-EE-12175

Rear-wheel-drive turbo diesel chassis with a 4 stroke, 4 in-line cylinder engine of 2000/2500 cc and a 5 speed gearbox, on a stand with wheels.

Note:

Digital Measurement of Angular Velocity

Product Code : EL-EE-12176

Stand-alone trainer kit for digital measurement of angular velocity, with a pulse generator, counter circuit and decoder, for speed measurement studies.

Note:

Automatic Hydraulic Surface Grinder

Product Code : EL-EE-12177

Hydraulic surface grinder with a low pressure power pack kept outside the machine body, honed cylinder and stock adjustment stoppers. Stops automatically after the job.

Note:

Anderson Equipment for particle

Product Code : EL-EE-12178

Apparatus for the sub-sieve particle distribution of a soil sample by mechanical analysis, with a sliding panel, 10 ml pipette and 500 ml glass tube.

Note:

Micro pipets variable volume 0-5 ml

Product Code : EL-EE-12179

Variable volume micro pipets with a range of 0-5 ml for laboratory use in labs, educational institutions and universities.

Note:

Step inputs Study Kit

Product Code : EL-EE-12180

Step inputs Study Kit The Inverter Trainer is a versatile training System for Laboratories.

Cold storage trainer

Product Code : EL-EE-12181

Refrigeration test rig with a hermetically sealed compressor, air cooled condenser, medium temperature evaporators and an energy meter on the compressor.

Note:

Natural convection and Radiation apparatus

Product Code : EL-EE-12182

Heat transfer setup with a heated vertical brass tube in a duct with an acrylic window, digital temperature indicator, ammeter, voltmeter and variac.

Note:

Natural convection and Radiation

Product Code : EL-EE-12183

Test unit with a polished vertical brass tube heated by an electric element in a duct with an acrylic window. Variac control, digital temperature and electrical readouts.

Note:

Multi heat exchanger

Product Code : EL-EE-12184

Multi heat exchanger Multi heat exchanger We are engaged in offering our

PID level control trainer

Product Code : EL-EE-12185

Stand-alone PID trainer with a microprocessor controller, adjustable proportional, integral and derivative bands and RC simulated loads with selectable time constants.

Note:

PID temperature control trainer

Product Code : EL-EE-12186

Tabletop water heating setup with SSR controlled heater, rotameter, RTD sensor and digital controller. USB link for SCADA monitoring.

Note:

Gas/Liquid Absorption

Product Code : EL-EE-12187

Pilot plant scale gas/liquid absorption column that lets students investigate packed tower absorption processes and hydrodynamics.

Note:

Pasteurization unit

Product Code : EL-EE-12188

Skid mounted flash pasteurizer using the indirect plate process, for clear products, fruit juices and products with pulp. Capacity adjusts automatically to filler flow.

Note:

CENTER LATHE

Product Code : EL-EE-12189

Gap-bed centre lathe, 1500 mm centre distance, 400 mm turning diameter over bed, 12 spindle speeds from 30 to 1600 rpm, supplied with chucks, centres and rests.

Note:

Thread Gauge

Product Code : EL-EE-12190

Stainless steel thread gauge with 16 blades for checking the thread profile of lead screws. Available in a polished finish.

Note:

Universal Milling machine

Product Code : EL-EE-12191

Universal milling machine with a 1300 x 305 mm table, 950 mm longitudinal and 290 mm cross traverse, spindle speeds of 40-3000 rpm and a swivelling vertical head.

Note:

Flat bottom flask

Product Code : EL-EE-12192

Flat bottom flask Made of borosilicate glass with a flat bottom .

Dividing head universal

Product Code : EL-EE-12193

Universal dividing head with 3 dividing plates and a 40:1 ratio for direct, indirect and differential division, with a phosphor bronze worm gear.

Note:

Swiveling machine vice

Product Code : EL-EE-12194

Swivel machine vice of high tensile casting with ground surfaces, tool steel jaw plates and 110 mm jaws.

Note:

Short milling arbor set For cutters with

Product Code : EL-EE-12195

Short milling arbor set for cutters with cross or longitudinal slot, with wrench, driver collar, cutter draw bolt and adjusting spring. Arbors 22/27/32 mm, M16 thread.

Note:

Long Milling Arbor Set for cutters

Product Code : EL-EE-12196

Long milling arbor set for cutters with cross or longitudinal slot, with wrench, driver collar, cutter draw bolt and adjusting spring. Arbors 22/27/32 mm, taper size 40.

Note:

Drilling Machine Vise

Product Code : EL-EE-12197

Machine vise for pillar and bench drills with a minimum jaw width of 100 mm, opening of 90 mm and jaw height of 25 mm.

Note:

MMA Welding machine

Product Code : EL-EE-12198

Dual voltage (230 V and 400 V) 200 A MMA arc welding machine, turbo fan cooled, for 2-6 mm electrodes, with hand shield, cables and electrode holder.

Note:

Horizontal spindle surface grinder

Product Code : EL-EE-12199

Surface grinder with horizontal spindle and reciprocating table, 7.5 hp wheel motor, 4.5 hp hydraulic power unit motor and a motor for vertical rapid traverse.

Note:

Upright drill machine with all its accessories

Product Code : EL-EE-12200

Variable speed upright drill machine with 32 mm drill capacity, 100 mm column, 558 x 495 mm table and 500-4000 rpm speed range.

Note:

Radial drilling Machine

Product Code : EL-EE-12201

Radial drilling machine listed for 40 mm drilling in solid steel and 50 mm in cast iron, with a 4 hp spindle motor, 70 mm quill and 250 mm spindle traverse.

Note:

Power hack saw With Accessories

Product Code : EL-EE-12202

Power hack saw with a 0.5 hp, 230 V motor, 400 mm blade at 80 strokes per minute, coolant system and swivel vice for angle cutting.

Note:

OPTICAL Theodolitet Measurement

Product Code : EL-EE-12203

Optical theodolite with a 30x erect-image telescope, optical micrometer and optical plummet. Supplied with aluminium tripod, batteries, charger, carry case and software.

Note:

Circular saw machine

Product Code : EL-EE-12204

Circular saw machine with a 300 mm blade at 4000 rpm, fixed and sliding tables and a 2 kW three phase motor. Supplied with 3 additional blades.

Note:

Jointer machine

Product Code : EL-EE-12205

Jointer machine with 300 mm surface width, 1800 mm table, 500 rpm cutter head and 2.2 kW three phase motor. Supplied with 6 additional knives.

Note:

Radial Arm saw

Product Code : EL-EE-12206

Radial arm saw with a 350 mm blade, 2.5 kW three phase motor, swivelling and tilting head and 920 mm cross cutting length. Supplied with 2 carbide tip blades.

Note:

Combined Thickness planer

Product Code : EL-EE-12207

Combined thickness planer with 410 mm working width, 3-200 mm surfacing thickness, 5 mm maximum depth of cut and a 1.5 kW motor.

Note:

Band saw

Product Code : EL-EE-12208

Band saw with a 40 mm blade, 500 mm wheels, 270 mm cutting height, 500 x 700 mm table and a 2.5 hp three phase motor.

Note:

Pressing machine /hydraulic cold press

Product Code : EL-EE-12209

Hydraulic cold pressing machine with 50 ton maximum pressure, 1250 x 2500 mm plate capacity, 1000 mm maximum opening and up to 8 hours holding time.

Note:

Belt sander

Product Code : EL-EE-12210

Belt sander with a 2500 x 800 mm working table that lifts automatically, 6800 x 150 mm belt, 17-35 m/sec belt speed and a 4 hp motor.

Note:

Portable router

Product Code : EL-EE-12211

Portable router with 40 mm plane cutter capacity, 1.2 kW motor and a speed of 16,000-30,000 rpm. Three phase or single phase supply.

Note:

Refrigerator with two doors Temperature 0+1000c.

Product Code : EL-EE-12212

Refrigerator with two doors Temperature 0+1000c.

Plasma TV

Product Code : EL-EE-12213

Plasma TV Plasma TV Panel Type: 50 Diagonal*, 16:9 Wide Screen, Plasma Panel

Computerized embroidery machine

Product Code : EL-EE-12214

Flat digital embroidery machine with 1, 2, 4 or 6 heads, six or nine needles, AC servo motor, colour touch screen and automatic colour change.

Note:

Flat bed single needle extra heavy duty machine

Product Code : EL-EE-12215

Flat-bed single needle chain stitch machine with pressure foot, 1200 stitches per minute, 13 mm stitch length and 51 mm needle bar stroke, for bulky and heavy materials.

Note:

Cylinder bed single needle heavy duty M/C

Product Code : EL-EE-12216

Heavy duty single needle lockstitch machine with a cylinder bed, inbuilt bobbin winder, and walking foot and needle feed. Maximum speed 2500 stitches per minute.

Note:

Narrow high post bed single needle

Product Code : EL-EE-12217

Single needle lockstitch machine with a narrow high post bed and pressure foot. Maximum speed 2000 stitches per minute, stitch length 6 mm, puller feed.

Note:

Electronic brushing-shining M/C

Product Code : EL-EE-12218

Belt brushing and shining machine with two brushes, variable speed and a vacuum system for dust. Working width 8 to 80 mm, 220 V, 500 W.

Note:

Spray Booth with Spray Gun Compressor

Product Code : EL-EE-12219

Spray Booth with Spray Gun and Compressor Automatic fan when client stands on the footplate

Ironing Table with buck

Product Code : EL-EE-12220

Flat ironing table, 1200 x 650 mm, with adjustable height and a universal buck. Listed as vacuum only.

Note:

Electric Steam Iron

Product Code : EL-EE-12221

Electrically heated steam iron with temperature control, 370 ml water tank and 1.50 m cord. Heat up time 1 minute, ironing time 15 minutes.

Note:

Hydraulic Clicking Press

Product Code : EL-EE-12222

20-ton hydraulic clicking press with standard dies and a 10 x 13 cm stamping area. 220 V/50 Hz, 150 W, temperature range 0-400 deg C.

Note:

Travelling Head beam clicking press

Product Code : EL-EE-12223

Hydraulic travelling head beam clicking press with 25 MPa working pressure, 400 mm slider stroke and a 520 x 520 mm worktable. Motor power 5.5 kW.

Note:

Pattern shearing machine

Product Code : EL-EE-12224

CO2 laser pattern machine with a 1600 x 1000 mm working size, 150 W laser tube, DSP control and water cooling. Resolution 0.025 mm.

Note:

Hydraulic compression testing machines

Product Code : EL-EE-12225

Hydraulic compression testing machine with 2000 kN maximum load, 1% force accuracy and 320 mm plate distance. Piston stroke 25 mm, 380 V supply.

Note:

Digital Pit Depth Gauge

Product Code : EL-EE-12226

Digital pit depth gauge with zero-setting at any position. Measuring ranges 0-25 mm, 0-30 mm, 0-50 mm, 0-100 mm and 0-150 mm.

Note:

Destructive weld tester

Product Code : EL-EE-12227

Horizontal destructive weld testing machine combining compression, tensile and bend tests. Tensile pull up to 50,000 lbs, coupon length up to 12 inches.

Note:

AUTOMATIC WELD SIZE GAUGE

Product Code : EL-EE-12228

Pocket-sized stainless steel gauge for checking butt and fillet type welds, with predetermined convexity and concavity sizes and etched readings.

Note:

Abrasion Tester

Product Code : EL-EE-12229

Linear abraser with a free floating head and interchangeable attachments for wear, scratch and crock meter tests. Adjustable stroke length, speed and load.

Note:

Fabric Stiffness Tester

Product Code : EL-EE-12230

Two-directional pendulum-type stiffness tester for fabric, paper, plastic, leather and sheet materials. Range 0-10,000 stiffness units.

Note:

Automatic yarn strength tester

Product Code : EL-EE-12231

Automatic single end yarn strength tester for up to 20 bobbins, using the constant rate of extension method. Load cells of 20 N, 50 N, 200 N and 500 N.

Note:

Fabric tear strength tester

Product Code : EL-EE-12232

Pendulum tear tester for sheet materials with automatic specimen notching, pneumatic clamping and a digital tearing force display. Table-top unit with safety hood.

Note:

Tearing Tester

Product Code : EL-EE-12233

Automated pendulum tear tester with digital display, pneumatic grips and interchangeable pendulums from 200 g to 6400 g. Stores up to 500 readings.

Note:

Viscosity meter

Product Code : EL-EE-12234

Viscometer that finds viscosity by timing a rod over a specified distance. For liquids and viscous materials such as printing inks. Rugged and simple to operate.

Note:

Drape Tester

Product Code : EL-EE-12235

Fabric drape tester that casts the shadow of a circular specimen on a paper ring to give the drape coefficient. Paper rings in 36, 30 or 24 cm diameter.

Note:

Spray Rating Tester

Product Code : EL-EE-12236

Spray rating tester for the resistance of fabric to surface wetting by water. 150 mm glass funnel, specimen slope 45 deg, 500 mL graduate. It does not test waterproofness.

Note:

PRINTER

Product Code : EL-EE-12237

Laser printer with a normal speed of at least 45 ppm, 1200 x 1200 dpi resolution, automatic duplexer, USB and Gigabit Ethernet connections.

Note:

Scanner

Product Code : EL-EE-12238

Flatbed scanner with a 50-sheet automatic document feeder and optical resolution up to 4800 dpi. Minimum 48-bit depth, USB and SCSI connections.

Note:

Switch

Product Code : EL-EE-12239

24 port network switch with 10/100/1000 transfer speeds up to Gigabit and store-and-forward transfer. Supports 10 Base-T and 100 Base-TX Ethernet.

Note:

Network Tool Kit

Product Code : EL-EE-12240

LAN network tool kit with carrying case: crimp tool, 110/66 impact punch tool, wire stripper, connectors, cable tester with loopback plug and screwdrivers.

Note:

Computer maintenance tool kit

Product Code : EL-EE-12241

Hand tool kit for computer maintenance with a flexible ratchet driver, precision screwdrivers, pliers, chip extractor, parts retriever and voltage tester.

Note:

Desktop computer

Product Code : EL-EE-12242

Desktop computer with 4 GB memory expandable to 16 GB, 500 GB minimum hard disk, DVD+/-RW drive and a 19 inch LCD monitor. USB keyboard and optical mouse.

Note:

Rotary Circular Shear Machine

Product Code : EL-EE-12243

Rotary circular shear with two rotary cutters and a sliding circle arm. Cuts circles of about 70 mm to 1200 mm in 1.5 mm mild steel. 380 V, 1 hp.

Note:

Tool cutter grinder

Product Code : EL-EE-12244

Tool cutter grinder with 90 mm longitudinal and cross travel, 190 mm vertical spindle travel and a 3400 to 5000 rpm spindle speed. Weight 600 kg.

Note:

Cut off machine

Product Code : EL-EE-12245

Cut off machine with a 2.5 kW three phase motor, 350 mm saw blade and 30 mm arbour. Head tilts 0 to 90 degrees. Supplied with 2 carbide-tipped blades.

Note:

MIG/MAG standard welding machines

Product Code : EL-EE-12246

MIG/MAG welding machine with infinite control, 5-300 A current and a 4 roller wire feed for 0.8 mm and 1.0 mm steel wires. 50/60 Hz mains.

Note:

TIG AC/DC welding machines

Product Code : EL-EE-12247

TIG AC/DC welding machine with a 5-300 A current, 100 V open circuit voltage and 50/60 Hz mains. Supplied with standard accessories and spares.

Note:

Rolling Machine

Product Code : EL-EE-12248

Sheet metal rolling machine with high strength steel rolls, a swing-out top roll and wire core grooves. Roll length 2050 mm, sheet thickness 1.5 mm.

Note:

Portable Hand Drill Machine

Product Code : EL-EE-12249

Portable hand drill machine for single phase, 220 V supply with a drilling capacity of 13 mm.

Note:

Oxygen Acetylene Hose

Product Code : EL-EE-12250

Matched pair of oxygen (blue) and acetylene (red) hoses, kink and crush resistant, 10 m long each, supplied fitted with hose check valves.

Note:

Spark Lighter

Product Code : EL-EE-12251

Metal bodied spark lighter for easy, rapid, single-handed ignition of welding and cutting torches. Uses standard lighter flints.

Note:

Heat treatment furnace

Product Code : EL-EE-12252

Heat treatment furnace Internal dimension 450x600x750mm

Fire extinguisher

Product Code : EL-EE-12253

Rechargeable ABC powder fire extinguisher for flammable materials, liquids and electrical equipment. Capacity 5 kg net, 10 kg gross, with all essential fittings.

Note:

Portable earth resistance meter

Product Code : EL-EE-12254

Portable meter for earth testing of electrical installations, complete with earthing rods, connection clamp, 30 m cable and standard accessories.

Note:

Portable frequency meter

Product Code : EL-EE-12255

Universal counter, 1.3 GHz: Channel A 5 Hz to 100 MHz, Channel B 80 MHz to 1.3 GHz, with a totalise range of 0 to 99999999

Note:

Blow Torch

Product Code : EL-EE-12256

Butane gas blow torch rated at 30-180 W and listed for soldering.

Note:

Single Phase Pump

Product Code : EL-EE-12257

Single Phase Pump Single Phase Pump In put A.C,3 phase,230/380v 50Hz,

Voltage Supply Unit

Product Code : EL-EE-12258

Single phase AC supply unit with a 50 Hz input and a 220 V, 50 Hz, 2 kVA single phase AC output.

Note:

Three-Phase Pole Changing Motor

Product Code : EL-EE-12259

Three-phase pole changing motor in an open drip proof enclosure, for 220/380 V, 50 Hz, with speeds of 1500/3000 rpm and a separate winding.

Note:

Panel voltmeter

Product Code : EL-EE-12260

Panel voltmeter Panel voltmeter 220/230 VAC 50/60 Hz Armatures from 6-12 inch diameter,

Square File

Product Code : EL-EE-12261

Square hand file, 200 mm long, 2 mm thick and 8 mm wide, supplied with a 125 mm wooden handle.

Note:

Flat File Double Cut

Product Code : EL-EE-12262

Double cut flat hand file, 250 mm long, 5.5 mm thick and 25 mm wide, supplied with a 125 mm wooden handle.

Note:

Half Round File

Product Code : EL-EE-12263

Half round hand file, 200 mm long with a nominal dimension of 20 x 6 mm, supplied with a 100 mm wooden handle.

Note:

Hack Saw Adjustable Frame

Product Code : EL-EE-12264

Adjustable-frame hack saw fitted with an HSS blade. Total frame length is approximately 465 mm.

Note:

Hack Saw Solid Frame

Product Code : EL-EE-12265

Solid-frame hack saw fitted with an HSS blade. Total frame length is approximately 465 mm.

Note:

Raising Hammer

Product Code : EL-EE-12266

Set of three dome-head raising hammers in long and short types, listed at 450 g and fitted with a handle.

Note:

Riveting Hammer

Product Code : EL-EE-12267

Set of three round-head riveting hammers in long and short types, listed at 340 g and fitted with a handle.

Note:

Adjustable Wrench

Product Code : EL-EE-12268

Chrome-plated forged alloy steel adjustable wrench with a rounded head and hard end jaws. Maximum jaw capacities of 13, 20, 25 and 30 mm.

Note:

Bench Vise

Product Code : EL-EE-12269

Fixed-base bench vise with an enclosed spindle, anvil and hardened, interchangeable jaws. Minimum size is 150 mm jaw width and 90 mm jaw depth.

Note:

Vernier Height Gauge

Product Code : EL-EE-12270

Special steel vernier height gauge with a stainless chrome finish, hard metal needle and fine adjustment. Reads with 1/20 mm accuracy, minimum range 0-300 mm.

Note:

Inside Micrometer

Product Code : EL-EE-12271

Inside micrometer with carbide-tipped measuring faces and extension rods, reading 0.01 mm. Listed at 25-200 mm and supplied in a carry case.

Note:

Protractor

Product Code : EL-EE-12272

Transparent plastic semicircle protractor with bevelled edges and imprinted graduations. Divided into 180 degrees, 150 mm diameter.

Note:

Triangular scale

Product Code : EL-EE-12273

Triangular (engineering) scale in dimensionally stable plastic, with two-colour marking for cm and m dimensions. Ratios from 1/10 to 1/500.

Note:

French curve in 1 set 3 pcs

Product Code : EL-EE-12274

Set of three standard-size French curves, 1 mm thick, with a double bevel tracing edge, supplied in a plastic wallet.

Note:

Lettering guides

Product Code : EL-EE-12275

Lettering guides in ten sizes from 2 mm to 14 mm, listed at 100 pcs for each size, for uniform lettering in technical drawing.

Note:

water closest/WC

Product Code : EL-EE-12276

Water closet (WC) sanitary fixture made of glazed porcelain or faience, with an outlet diameter of 85 mm at the bottom.

Note:

Plotter machine power

Product Code : EL-EE-12277

Plotter machine power Plotter machine power. 220v,3000w, color.

Shower Tray

Product Code : EL-EE-12278

Ceramic or acrylic shower tray with a floor drain 40 mm in diameter and a fixture trap located in a corner.

Note:

Wash basin

Product Code : EL-EE-12279

Wash basin with a bowl, soap tray and outlet, made of non-corrodible metal or fibre glass. Approximate size 600 x 100 mm, single hole.

Note:

Bidet toilet seat Direct inlet flow

Product Code : EL-EE-12280

Direct inlet flow bidet toilet seat with warm water wash, 600 W water heater, 55 W heated seat, warm air dryer and remote control.

Note:

Sanitary Fixtures

Product Code : EL-EE-12281

Range of sanitary fixtures: vitreous china range, montage accessories, seats and covers, wash basin and special fixtures.

Note:

Leakage Tester machine

Product Code : EL-EE-12282

Fuel injector leakage tester with an air test flow of 5-150 ml/min and a clamping force of 1960 N. Stand weight is 20 kg.

Note:

Fire extinguisher

Product Code : EL-EE-12283

Rechargeable ABC powder fire extinguisher for flammable materials, liquids and electrical equipment. Capacity 5 kg net and 10 kg gross.

Note:

Portable Electric Drill

Product Code : EL-EE-12284

Portable electric drill with a capacity of 0-8 mm, suitable for a 220 V AC single phase, 50 Hz electric supply.

Note:

Automated Micro Hardness Testing Machine

Product Code : EL-EE-12377

Automated micro hardness tester for Micro Vickers and Knoop tests, forces 10 to 2000 gf, motorised turret and load change controlled via PC, with X-Y table and component vice.

Note:

Portable earth resistance meter

Product Code : EL-EE-12286

Portable earth resistance meter for earth testing of electrical installations, with earthing rods, connection clamp and a 30 m cable.

Note:

Portable frequency meter

Product Code : EL-EE-12287

Universal counter to 1.3 GHz. Channel A covers 5 Hz to 100 MHz and channel B covers 80 MHz to 1.3 GHz.

Note:

Blow Torch

Product Code : EL-EE-12288

Butane gas blow torch rated 30-180 watts, listed for soldering use.

Note:

Single Phase Pump

Product Code : EL-EE-12289

Single Phase Pump In put A.C,3 phase,230/380v 50Hz,

Three- Phase Squirrel Cage Motor

Product Code : EL-EE-12290

Three-phase squirrel cage motor with an open drip proof enclosure, 1-2 hp for 220/380 V, 50 Hz, 1500/3000 rpm, separate winding.

Note:

Panel voltmeter

Product Code : EL-EE-12291

Panel voltmeter Panel voltmeter 220/230 VAC 50/60 Hz Armatures from 6-12 inch diameter,

Bench lever shear

Product Code : EL-EE-12292

Compact carbon steel bench lever shear with re-sharpenable high carbon, high chrome steel blades, about 500 mm long, for sheet metal 3-5 mm thick.

Note:

Growler

Product Code : EL-EE-12294

Hand held growler for testing armatures from 6-12 inch and stators from 2-12 inch diameter, rated 220/230 VAC, 50/60 Hz.

Note:

Analogue multimeter

Product Code : EL-EE-12295

Miniature analogue multimeter (VOM) with DC and AC voltage ranges of 3 to 1200 V, four ohm ranges and four DC current ranges. Weight 12 oz.

Note:

Voltage Stabilizer

Product Code : EL-EE-12296

Voltage stabilizer rated 1000 VA at 220 V, 50 Hz, with stabilized output between 220 V and 230 V, complete accessories and service manual.

Note:

Electro-Pneumatic system

Product Code : EL-EE-12297

Teaching model for pneumatic control, consisting of a fixing board, electro-pneumatic valves, actuating switches and all accessories.

Note:

Time delay Relay

Product Code : EL-EE-12298

Excitation delay relay for a 220-250 V AC supply, with a programmable delay of 6-60 seconds and a normally open contact.

Note:

LCD projector

Product Code : EL-EE-12311

Mini multimedia LCD LED projector with a 300:1 contrast ratio, built-in speakers, 4:3 and 16:9 aspect ratios and manual focus.

Note:

Crimping Machine

Product Code : EL-EE-12300

Three-phase, 1 hp crimping machine with a minimum capacity of 1.5 mm mild steel, supplied with an operational and maintenance manual in English.

Note:

Contactor

Product Code : EL-EE-12301

Magnetic contactor for motors 3 x 220/380 V, with 3 main operating contacts, 2 auxiliary contacts and a 220 V, 50 Hz coil.

Note:

Bench drill machine

Product Code : EL-EE-12302

Bench drill machine with 16 mm drilling capacity, 120 mm depth, a 300 x 400 mm table and 6 spindle speeds from 560-3500 rpm. Rated 550 W.

Note:

Pedestal Grinding Machine

Product Code : EL-EE-12303

Pedestal grinding machine with a 1.6 kW three phase, 380 V motor and 665 mm between the grinding wheels. Maximum grinding dimension 300 x 50 x 25 mm.

Note:

Tip Cleaner

Product Code : EL-EE-12304

High strength needle-type files in an anodised aluminium flip-up pocket case. Approximate sizes 0.5-2.7 mm.

Note:

12V and 24V battery charger

Product Code : EL-EE-12305

Battery charger for slow and fast charging of 12 V and 24 V car batteries. Input 220 V, 50 Hz; output 12 V/24 V DC; 65 A charge peak.

Note:

Center Punch

Product Code : EL-EE-12306

Hardened and tempered steel center punch with a knurled body for positive grip. Length 100 mm, point diameter 3.2 mm.

Note:

Measuring wheels

Product Code : EL-EE-12307

Measuring wheel with a mechanical counter, a steel rim wheel 318.5 mm in diameter, 1 m circumference and PVC tyres. Tolerance less than 0.02%.

Note:

Optical square

Product Code : EL-EE-12308

Optical square with double pentaprisms for right angle sighting in either direction, a sliding metal cover, case and manual. Dimension 25 x 10 mm.

Note:

Plumb Bobs

Product Code : EL-EE-12309

Plumb bobs with a metal top plate and point and a bright turned finish, about 400 g, made of brass or other non-corroding material.

Note:

Mirror Stereoscope

Product Code : EL-EE-12310

Mirror stereoscope with a binocular viewer, 4x magnification and an adjustment range of 54 mm to 74 mm.

Note:

Binocular

Product Code : EL-EE-12312

8x porro prism binocular with fully multi-coated optics, twist-up eyecups, rubber covering, centre focus knob and carrying case.

Note:

Measuring tape

Product Code : EL-EE-12313

30 m metric metal measuring tape of the derrick type, a hand tool for measuring lengths and distances.

Note:

Measuring tape

Product Code : EL-EE-12314

30 m long steel measuring tape with heavy brass loops at the ends for attaching tongs and tension handles.

Note:

Wheel barrow

Product Code : EL-EE-12315

One-wheeled barrow with a 75 litre seamless alloy steel tray, reinforced tubular edges, plastic handle grips and a semi-pneumatic rubber-lined wheel.

Note:

Straight Edges

Product Code : EL-EE-12316

Aluminium straight edges, 3 m long, 7 cm wide and 2.5 cm thick, for checking flatness and guiding straight lines in engineering practicals.

Note:

Standard spatula

Product Code : EL-EE-12317

Standard spatula with a wide handle and a non-corroding metal blade of approx. 20 mm.

Note:

Concrete Mixers

Product Code : EL-EE-12318

Portable electric concrete mixer with a tipping mechanism, 56 litre capacity, 2 kW motor and adjustable blade. Supplied with operation and servicing manuals.

Note:

Inside Micrometer

Product Code : EL-EE-12319

Inside micrometer with carbide tipped faces and extension rods, reading 0.01 mm, range 25-200 mm, supplied in a carry case.

Note:

Out-Side Micrometer

Product Code : EL-EE-12320

Outside micrometer in four ranges: 0-25 mm, 25-50 mm, 50-75 mm and 75-100 mm. Supplied in a carry case.

Note:

Out-Side Micrometer

Product Code : EL-EE-12321

Out-side micrometer in various scales: 0-25 mm, 25-50 mm, 50-75 mm and 75-100 mm, supplied in a carry case.

Note:

Protractor

Product Code : EL-EE-12322

Transparent plastic protractor, full semicircle with bevelled edges and imprinted graduations over 180 degrees, 150 mm in diameter.

Note:

Triangular scale engineering scale

Product Code : EL-EE-12323

Plastic triangular engineering scale with precision divisions numbered both ways, two colours, and scales from 1/10 to 1/500.

Note:

Portable drawing tables A3

Product Code : EL-EE-12324

Plastic portable drawing table of A3 size, 420 x 297 mm, for technical drawing practice.

Note:

Set square 30°-60°

Product Code : EL-EE-12325

Plastic 30-60 degree set square for drawing lines at set angles in technical drawing and engineering graphics.

Note:

Masking tap

Product Code : EL-EE-12326

Thin, flexible masking tape in a roll 50 m long and 25 mm wide.

Note:

Pipe Reamer

Product Code : EL-EE-12327

Half-round, cone-shaped pipe reamer with a wooden or plastic handle, diameter 1 to 10 mm.

Note:

Voltage Stabilizer

Product Code : EL-EE-12328

Voltage stabilizer rated 1000 VA with a stabilised output of 220 V to 230 V on a 220 V, 50 Hz supply. Supplied with accessories and a service manual.

Note:

Electro-Pneumatic system

Product Code : EL-EE-12329

Teaching model for pneumatic control with a fixing board, electro-pneumatic valves, actuating switches and all accessories.

Note:

Time delay Relay

Product Code : EL-EE-12330

Time delay relay with a programmable delay of 6 to 60 seconds, a normally open contact and a 220 V to 250 V ac supply.

Note:

Winding coil Copper

Product Code : EL-EE-12331

Insulated copper winding wire, 0.71 mm in diameter and 120 m long, for transformer winding.

Note:

Mason bolster

Product Code : EL-EE-12332

Mason bolster for cutting stone, 225 x 50 mm, with ground cutting edges and an octagonal shank.

Note:

Mortar spade

Product Code : EL-EE-12333

Mortar spade Mortar spade Production capacity: 3000 - 4200 can/hr Main driving head power: 1.1kw

Bar cutter machine

Product Code : EL-EE-12334

Manually operated bench bar cutter with gear lever and safety lever. Cuts round bars of 20 mm, square 20 x 20 mm and flat 10 x 35 mm.

Note:

Slump Test cone with apparatus

Product Code : EL-EE-12335

Slump cone, 20 cm base, 10 cm top and 30 cm high, with a lifting-handle base plate and two 16 mm x 600 mm tamping rods.

Note:

Vibrator with hose mixer

Product Code : EL-EE-12336

Petrol-run 3 HP (2 kW) concrete vibrator with a 25 x 350 mm tip and 5 m flexible hose, for compacting test cylinders and beams.

Note:

Compression Test machine

Product Code : EL-EE-12337

Hydraulic dual-column compression test machine, 10 kN to 1,000 kN, digital display, for 150 x 300 mm concrete cylinders up to 50 MPa.

Note:

Tensile Test machine

Product Code : EL-EE-12338

Single screw tensile test machine, up to 10 kN, with variable speed from 10 to 500 mm/minute and an LCD readout of peak load and tensile strength.

Note:

Exhaust gas analyzers

Product Code : EL-EE-12339

Exhaust gas analyzer for petrol engines with an HC meter (0 to 400 ppm) and a CO meter (0 to 10%), 100 W, 220 V, 50 Hz.

Note:

Portable Grinding machine

Product Code : EL-EE-12340

Portable Grinding machine Table vibrator 5m x 60 cm

Tile cutter

Product Code : EL-EE-12341

Tile cutter machine for ceramic, marble, gypsum and PVC tiles. 1.3 kW motor, 13000 rpm, 34 mm depth of cut, 0 to 45 degree bevel.

Note:

Laying on trowel

Product Code : EL-EE-12342

Laying-on trowel with a wooden or plastic handle and a flat-edged metal blade, approx. 100 x 50 mm.

Note:

Cold Flat Chisel

Product Code : EL-EE-12343

Cold flat chisel of hardened steel with a plastic grip, 150 mm long and 13 mm wide.

Note:

Portable Jig saw

Product Code : EL-EE-12344

Portable jig saw, 1.6 kW, 500 to 3000 rpm, 25 mm stroke. Cuts 100 mm wood, 20 mm aluminium and 6 mm steel; 5 sets of blades supplied.

Note:

Portable circular saw

Product Code : EL-EE-12345

Portable circular saw with a 210 mm blade, 1.6 kW motor and 4000 rpm. Cuts 70 mm deep at 90 degrees and 45 mm at 45 degrees; 3 blades supplied.

Note:

Moisture meter

Product Code : EL-EE-12346

Compact moisture meter, measuring range 4 to 30 m.c., powered by a 9 volt battery or a rechargeable battery.

Note:

Spray gun

Product Code : EL-EE-12347

Electric all-purpose paint spray gun, 1 litre capacity, 1.8 mm nozzle set, easy to clean, 220 V, 50 Hz.

Note:

Air compressor

Product Code : EL-EE-12348

Air compressor, 115 psi working pressure, 1.5 HP, 24 litre air receiver, fully automatic stop and start control.

Note:

Band saw butt welding machine

Product Code : EL-EE-12349

Butt welding machine for band saw blades up to 60 mm wide, minimum thickness 0.5 mm, with a shear-type grinding machine and electronic annealing device.

Note:

Anvils

Product Code : EL-EE-12350

Anvils in three weights: 25 kg (384 mm long), 50 kg (520 mm) and 100 kg (711 mm), for forging and metal shaping.

Note:

Vernier Height Gauge

Product Code : EL-EE-12351

Vernier height gauge of special steel with a stainless chrome finish, hard metal needle and fine adjustment. Range 0-300 mm, 1/20 mm accuracy.

Note:

Inside Micrometer

Product Code : EL-EE-12352

Inside micrometer with carbide tipped faces and extension rods, hardened satin chromed spindle, 0.5 mm thread lead, 0.01 mm reading.

Note:

Viscosity meter

Product Code : EL-EE-12353

Rod-type viscosity meter for liquids and viscous materials, including printing inks. Viscosity is calculated from the rod travel time.

Note:

Drape tester

Product Code : EL-EE-12354

Fabric drape tester with light and parabolic mirror. Drape coefficient is found from the shadow traced on 36, 30 or 24 cm paper rings.

Note:

Spray rating tester Spray rating tester Spray Rating

Product Code : EL-EE-12355

Spray rating tester for the resistance of fabrics to surface wetting by water. 150 mm glass funnel, 45 degree specimen rack, 500 mL graduate.

Note:

Hydraulic compression testing machines

Product Code : EL-EE-12356

Hydraulic compression testing machine, maximum load 2000 kN, force accuracy +/- 1%, 320 mm between plates, 380 V, 50 Hz supply, 800 kg.

Note:

Travelling Head beam clicking press

Product Code : EL-EE-12357

Hydraulic travelling head beam clicking press: 25 MPa working pressure, 400 mm slider stroke, 520 x 520 mm worktable, 5.5 kW motor, ejector 20 t.

Note:

Spray Booth with Spray Gun

Product Code : EL-EE-12358

Spray Booth with Spray Gun and Compressor Automatic fan when client stands on the footplate (energy saving)

Bench grinder

Product Code : EL-EE-12359

Bench grinder for wheels up to 150 x 16 mm with a 12.7 mm hole and an overall length of 375 mm.

Note:

Pneumatic valve

Product Code : EL-EE-12360

Pneumatic valve Pneumatic valve lapping kit Rocking type Pneumatically

Engine stethoscope

Product Code : EL-EE-12361

Engine stethoscope with a sensitive probe, tube and ear plugs for locating and identifying engine faults by sound.

Note:

Cooling system analyzer

Product Code : EL-EE-12362

Radiator and cap tester for cooling system leaks, with a hand pump, pressure dial gauge, extension hose, universal adaptors and thermometer.

Note:

Injector tester

Product Code : EL-EE-12363

Bench-mounted, hand-operated injector tester with a 0-400 bar capacity and a quick-action clamp for diesel injectors. Supplied with 2 demonstration injectors, connectors, spare filters and seals.

Note:

Cylinder leakage testers petrol engine

Product Code : EL-EE-12364

Cylinder leakage tester for petrol engines with 14 or 18 mm spark plugs. One gauge reads cylinder leakage in % and cylinder pressure; supplied in a carry case.

Note:

Diesel engine compression tester

Product Code : EL-EE-12365

Tool kit to measure the compression pressure holding capacity of diesel engines. 70 mm, 70 bar (1000 psi) gauge with glow plug and injector adapters, in a plastic case.

Note:

Engine analyzer

Product Code : EL-EE-12366

Engine analyser with analog dwell angle display for 4, 6 and 8 cylinders, tachometer, voltmeter, timing light and a 300 mm oscilloscope screen. Runs on 220 V, 50 Hz.

Note:

Belt sander

Product Code : EL-EE-12367

Belt sander with a 2500 x 800 mm working table, automatic table lifting and a 6800 x 150 mm belt at 17-35 m/sec. Main motor 4 HP (3 kW).

Note:

Wood turning lathe machine

Product Code : EL-EE-12368

Wood turning lathe with 500-3150 RPM spindle speed, 457 mm distance between centres and a 350 W, 220 V motor. Packing size 840 x 430 x 300 mm.

Note:

Pressing machine hydraulic

Product Code : EL-EE-12369

Hydraulic cold press with 50 ton maximum pressure, 1250 x 2500 mm plate capacity and 1000 mm maximum opening. Holding time up to 8 hrs; 3.7 kW, 220 V motor.

Note:

Wood Test

Product Code : EL-EE-12370

wood test wood test Dry sticks .

Gas Cartridges

Product Code : EL-EE-12371

Disposable, portable butane gas cartridges of 190 g each, 90 mm in overall height, used with a portable burner. Supplied in a box of 12.

Note:

Wire Gauze

Product Code : EL-EE-12372

Square steel wire gauze, 125 x 125 mm, with a circular ceramic fibre centre of 70-90 mm diameter. Used under glassware when heating over a burner.

Note:

Surgical Scissors

Product Code : EL-EE-12373

Straight stainless steel surgical scissors, 125 mm in length, for dissection and cutting work in biology and medical training.

Note:

Polythene Bags

Product Code : EL-EE-12374

Black plastic polythene bags, 25 x 15 cm, used for sowing seedlings. Supplied in packs of 100 pieces.

Note:

The semi-automatic electrochemical copying

Product Code : EL-EE-12375

Semi-automatic electrochemical copying-broaching device for shaping steels and alloys. 300 x 200 mm table, 700 x 440 x 600 mm chamber, 4200 sq. mm processing area.

Note:

Wire EDM

Product Code : EL-EE-12376

CNC wire EDM (wire electrical discharge machine) with X-axis travel of 349.5 mm, Y-axis travel of 299.5 mm and Z-axis travel of 149.8 mm.

Note:

Welding Inspectors Tool Kit

Product Code : EL-EE-12378

Weld inspection kit with fillet weld gauges (WTPS, Skew-T and adjustable), a bridge cam gauge, a Hi-Lo gauge, a scale and a magnifier.

Note:

NDT Hardness tester

Product Code : EL-EE-12379

NDT hardness tester with a motorised probe, a hardness test block (HRC55), a 1.5 m probe cable, AC adaptor and Li-ion rechargeable battery with charger.

Note:

Ultrasonic Testing

Product Code : EL-EE-12380

Phased array ultrasonic flaw detector in 16:64 configuration, with S-Scan and L-Scan, 50 / 100 MHz digitising and 2 conventional UT / TOFD channels.

Note:

Digital Radiography

Product Code : EL-EE-12381

Digital radiography flat panel with a 40 x 40 cm active area and 14 bit grey scale. Direct digital X-ray images in Tiff or Jpg format, with no film or dark room.

Note:

Computed Radiography

Product Code : EL-EE-12382

Computed radiography rigid cassette and phosphor plate reader with integrated eraser. Scans a 14 x 17 in (35 x 43 cm) plate in 35 to 135 seconds depending on resolution.

Note:

X-RAY RADIOGRAPHY

Product Code : EL-EE-12383

X-ray radiography unit with a 100-300 kV range and 0.1-5 mA tube current. 100% duty cycle, SF6 gas insulation, air-cooled anode, 40 deg beam angle, 180-260 V mains.

Note:

Radiographic Tester

Product Code : EL-EE-12384

Radiographic tester for Ir-192 or Se-75 isotopes under special form, 4.44 TBq (120 Ci) each. Maximum surface dose rate 2 mSv/h; total weight 22 kg (48.5 lb).

Note:

Magnetic particle NDT tester

Product Code : EL-EE-12385

Magnetic particle NDT tester . Possibility of defects detection: Depth = from 0.1 mm Opening = from 0.002 mm

EDDy CURENT

Product Code : EL-EE-12386

Eddy current instrument detecting defects from 0.1 mm depth and 0.002 mm opening. Frequency 50 Hz to 12 MHz, generator output 0.5 V to 6 V, 5 digital filter types.

Note:

Welding Table

Product Code : EL-EE-12387

Welding Table Welding Table standard welding table with Full

Tool Cabinet

Product Code : EL-EE-12388

Wall-mounted sheet metal tool cabinet, 1000 x 1000 x 340 mm (H x W x D), with a locking catch. Supplied empty with approx. 150 tool holders.

Note:

Experiment case

Product Code : EL-EE-12389

Safety trainer with test points to measure voltages at different points, circuit diagram, and demonstrations of a fuse, earthing and an MCB. Supplied with a manual of student activities.

Note:

Electrical Distribution Trainer

Product Code : EL-EE-12390

Electrical distribution trainer with digital voltmeter and ammeter, 0-30 V variable AC and DC supplies, step-up and step-down transformers of 150 VA, protection relays and four load types.

Note:

Wind Generator

Product Code : EL-EE-12391

Wind energy trainer with a 3 blade turbine setup and training board, on-board 0-10 V voltmeter and 0-500 mA ammeter, for studying wind-based DC power generation and battery charging.

Note:

Electrical Machine Trainer

Product Code : EL-EE-12392

Electrical machine trainer with a 3 HP, 440 V, 1500 RPM induction motor coupled to a 1 kW shunt generator, DOL starter, analog meters and a tachometer.

Note:

Soldering Machine

Product Code : EL-EE-12393

Pulse heat soldering machine with a 4 stage temperature ramp profile, preset temperatures up to 450 deg C, bonding force 1-40 kgf and a 55 x 3 mm maximum thermode. 220 V AC, 2 kVA.

Note:

Oxygen Cylinder

Product Code : EL-EE-12394

Type MM oxygen cylinder, 5-6 m3 (5000-6000 litres), storage pressure 2050-700 PSI, service pressure below 2000 PSI. Length 1.6 m, outer diameter 240 mm, about 35 kg.

Note:

Projection welding Machine

Product Code : EL-EE-12395

Water-cooled projection welding machine rated 200 kVA at 50% duty cycle on 415 V, 3 phase supply. Welding current 68 kA; electrode pressure 300 to 2500 kPa; throat depth 480 mm.

Note:

Welding Machine

Product Code : EL-EE-12396

AC, fan-cooled welding machine on wheels for manual metal arc (stick) welding, with stepless regulation of welding current and double secondary voltage for basic and rutile electrodes.

Note:

Fire Alarm Trainer

Product Code : EL-EE-12397

Bench-mounted two-zone fire alarm trainer with smoke, fixed temperature and rate of rise detectors, a manual call point, and visual and audio alarms. Control unit with 6 switched faults.

Note:

Security alarm trainer

Product Code : EL-EE-12398

Security alarm trainer Security alarm trainer Salient Features : Has built in

Electrical installation trainer

Product Code : EL-EE-12399

Table-top modular electrical installation trainer (5 x 3 panels) with 4 mm shrouded patch cords, 3 phase DOL starter, 3 contactors, 2 timers and 8 change over relays.

Note:

Standard TV Trainer

Product Code : EL-EE-12400

Television trainer with input, horizontal and vertical circuits and a 14 inch screen, with a fault switch and accessible test points. Single phase 220 V AC, 50 Hz, 75-100 W.

Note:

Linear IC tester

Product Code : EL-EE-12401

Linear IC tester for TO-5 and DIP packages (with adaptor). Applied voltage 0 to 30 V, Vin and Voff 0 to 10 mV, current ranges 1, 3, 10 and 30 mA.

Note:

Training Model of open loop and closed

Product Code : EL-EE-12402

Training model of an open loop and closed loop controller, suitable for introducing the basic principle of open and closed loop control. Supplied with a training manual.

Note:

Training Model of (pneumatic controller)

Product Code : EL-EE-12403

Training model for introducing the basic principle of pneumatics and control mechanisms, with an air delivery compressor, single acting cylinder, flow control valve, time delay valve and valve actuators.

Note:

Audio tape Recorder Training model

Product Code : EL-EE-12404

Audio tape recorder training model for introducing the basic principle of the recorder. Supplied with all accessories, circuit diagram, a trouble-making switch and test points.

Note:

FM Transmitter trainer

Product Code : EL-EE-12405

FM transmitter trainer with RF output in the 88 to 108 MHz range at 100 mW. Runs from a +15 V stabilized source, 300 mA worst case consumption; manual and schematics supplied.

Note:

RLCV meter digital Parameter measure

Product Code : EL-EE-12406

Digital RLCV meter for parameter measurement. Resistance range 10 mohm to 10 Mohm; 9 V DC supply with external adaptor input of 12 to 15 V DC at 50 mA. Supplied with accessories and manual.

Note:

Function generator

Product Code : EL-EE-12407

Sweep / function generator with 0.02 Hz to 5 MHz output, sine, square, triangle and pulse waveforms, AM and FM modulation and a 5 digit LED frequency counter (5 Hz to 50 MHz).

Note:

Audio Amplifier

Product Code : EL-EE-12408

Bench-mounted public address system amplifier, 100 watt, with 4 inputs, an input selector switch, volume, bass and treble controls and a 10 m spare microphone cable.

Note:

Signal generator

Product Code : EL-EE-12409

RF signal generator covering 100 kHz to 150 MHz in 6 ranges, with 100 mV rms RF output and a high-low switch with fine adjustment of the output.

Note:

Photo copy machine

Product Code : EL-EE-12410

Photo copy machine Photo copy machine single phase AC,

Programmable IC tester

Product Code : EL-EE-12411

Programmable IC tester Programmable IC tester Portable EPROM Programmer.

Color pattern generator

Product Code : EL-EE-12412

Color pattern generator Fluke type PM 541 xc, 22ov, 50kg with different in vhf and VHF with a depurate pouter

Signal Generator

Product Code : EL-EE-12413

RF signal generator, 100 kHz to 150 MHz in 6 ranges, with 100 mV rms RF output, high-low switch and fine adjustment.

Note: