Educational learning Board For ARM Cortex Manufacturer,Supplier and Exporter in India
Product Code : EL-ELT-13402
Quick Answer: The Educational Learning Board for ARM Cortex is a Cortex M3 development board with an LPC1768 32 bit microcontroller working up to 100 MHz, 512 KB of on-chip Flash, JTAG and USB flashing, and Ethernet, CAN, USB host, SPI, I2C and UART interfaces.
Last updated: October 2026
Key Features
- LPC1768 Cortex M3 32 bit microcontroller, up to 100 MHz
- 512 KB on-chip Flash memory
- USB based flashing along with JTAG
- On-board LED, key, matrix keyboard, EEPROM, buzzer and temperature sensor
- Ethernet, CAN, USB host, SPI, I2C and UART interfaces
- 34 pin TFT LCD interface connector and audio out speaker interface
Technical Specifications
| Specification | Value |
|---|---|
| Microcontroller | LPC1768 Cortex M3, 32 bit |
| Maximum speed | 100 MHz |
| Flash memory | 512 KB on chip |
| Programming | USB based flashing; 20 pin (2x10) JTAG connector; ISP using on-chip boot loader |
| EEPROM | 256 Kbit serial I2C |
| DMA | Eight channel general purpose |
| Communication | USB connector for UART-0 debug console; DB9 for UART-1; USB host; DB9 for CAN; RJ45 for Ethernet; SPI based MMC card interface |
| Display and audio | 34 pin TFT LCD connector; audio out speaker interface |
| GPIO | 20 pin (10x2 header) connector for 16 GPIO lines |
| ADC | 2x5 pin connector for 6 channel ADC; potentiometer to test on-chip ADC |
| Switches | Reset switch with LED; Run/Program (boot mode) switch with LED |
| Input voltage | 9 V DC |
About This Product
Cortex M3 boards are used in electronics and embedded-systems courses to teach 32 bit microcontroller programming. This board combines the microcontroller with on-board devices such as LEDs, keys, a matrix keyboard, EEPROM, a buzzer and a temperature sensor, so students can write and test programs for input, output, memory, serial communication and Ethernet. It can be flashed over USB or through JTAG.
Frequently Asked Questions
Q1. Which microcontroller does the Educational Learning Board for ARM Cortex use?
It uses the LPC1768 Cortex M3 32 bit microcontroller, which works up to 100 MHz.
Q2. How is the board flashed?
It supports USB based flashing along with JTAG, and ISP using the on-chip boot loader.
Q3. What communication interfaces does it have?
It has USB host, CAN, Ethernet, UART-0, UART-1, SPI and I2C interfaces.
Related: Embedded Lab Trainers, Educational Learning Board for Microcontroller, Digital Trainer with Bread Board.
For a quotation on the Educational Learning Board For ARM Cortex, contact School Lab Equipment India.