Compression Testing Machine Manufacturer,Supplier and Exporter in India
Product Code : EL-CEL-12151
Quick Answer: The Compression Testing Machine (2000 kN) is a single dial, hydraulic and electrically operated unit for compression tests on concrete specimens, rocks and various other materials, with a steel cross head, cast iron base, two pillars and a self-aligning upper part.
Last updated: October 2026
Key Features
- Capacity 2000 kN, single dial, electric operated
- Hydraulic and electrically operated, for compression tests on concrete, rocks and other materials
- Steel cross head and cast iron base joined by two pillars with nuts
- Self-aligning upper part on a screw that is raised or lowered for initial clearance adjustment
- Lower platen rests on the jack ram and is positioned by a centring pin
- Motorised plunger type pumping unit connected to the jack by a steel connecting tube
Technical Specifications
| Specification | Value |
|---|---|
| Capacity | 2000 kN |
| Indication | Single dial |
| Operation | Hydraulic, electrically operated |
| Frame | Steel cross head, cast iron base, two pillars with nuts |
| Hydraulic jack | Fixed to the base |
| Upper part | Self-aligning, on a screw through the cross head |
| Lower platen | Rests on the jack ram, positioned by a centring pin |
| Pumping unit | Motorised, plunger type, steel connecting tube to the jack |
About This Product
A compression testing machine presses a specimen between two platens until it fails, and the load at failure gives its compressive strength. Machines of this type are used in civil engineering laboratories to test concrete specimens and rocks. Here the hydraulic jack pushes the lower platen upward against the self-aligning upper part, which is first set for clearance with its screw, and a motorised pumping unit supplies the jack. The Compression Testing Machine (2000 kN) can be supplied for export orders from Sierra Leone, Japan, Montenegro, New Zealand and South Sudan.
Frequently Asked Questions
Q1. What is the capacity of the Compression Testing Machine?
The machine is listed as 2000 kN, single dial, electric operated.
Q2. What materials can be tested?
It is intended for compression tests on concrete specimens, including rocks and various other materials.
Q3. How is the load applied?
Loading is accomplished by the upward movement of the lower platen, which rests on the jack ram. A motorised plunger type pumping unit is connected to the jack by a steel connecting tube.
Related: Civil Engineering Lab, Flexure Testing Machine, Digital Tensile Testing Machine, Direct Shear Testing Machine.
For a quotation on the Compression Testing Machine (2000 kN), contact School Lab Equipment India.