Automatic yarn strength tester Manufacturer,Supplier and Exporter in India
Product Code : EL-EE-12231
Quick Answer: The Automatic Yarn Strength Tester is a single end yarn tester that works automatically on up to 20 bobbins and calculates tensile strength, elongation, tenacity, work and modulus, using the constant rate of extension method with specimen lengths of 100-500 mm.
Last updated: October 2026
Key Features
- Fully automatic testing of up to 20 bobbins
- Calculates tensile strength, elongation, tenacity, work and modulus
- Constant rate of extension (CRE) method
- Load cells available in 20 N, 50 N, 200 N and 500 N
- Results sent to a PC through the serial port
- Software plots: force/elongation histogram, linear regression and average force curve of a bobbin
Technical Specifications
| Specification | Value |
|---|---|
| Type | Automatic single end yarn tester |
| Method | Constant rate of extension (CRE) |
| Load cells available | 20 N, 50 N, 200 N, 500 N |
| Speeds | 20-5000 mm/min |
| Specimen length | 100-500 mm |
| Bobbins | Up to 20 |
| Creel | 20 positions, maximum diameter 250 mm |
| Supplied with | One load cell and one set of clamps with faces |
| Power supply | 110 V/60 Hz or 220 V/50 Hz |
About This Product
A single end yarn tester pulls one length of yarn at a time until it breaks and records the force and the elongation. From these readings it calculates tensile strength, tenacity and modulus. In textile labs, yarn strength results are used to compare yarns and to judge their suitability for weaving or knitting. An automatic model feeds yarn from a creel of bobbins, so that many yarns can be tested one after another and the data stored on a PC. School Lab Equipment India can export the Automatic Yarn Strength Tester to education buyers in Costa Rica, Syria, Poland, Cyprus and Venezuela.
Frequently Asked Questions
Q1. How many bobbins can the Automatic Yarn Strength Tester handle?
It can test up to 20 bobbins, using a creel with 20 positions.
Q2. Which load cells are available?
Load cells of 20 N, 50 N, 200 N and 500 N are listed.
Q3. What power supply does it use?
It is listed for 110 V/60 Hz or 220 V/50 Hz.
Related: Engineering Equipment, Fabric tear strength tester, Fabric stiffness tester, Abrasion tester.
For a quotation on the Automatic Yarn Strength Tester, contact School Lab Equipment India.