Dividing head universal Manufacturer,Supplier and Exporter in India
Product Code : EL-EE-12193
Quick Answer: The Universal Dividing Head is a milling machine accessory supplied with 3 dividing plates, a tailstock, centre point and driver, and a drive gear train from the spindle to the head, for direct, indirect and differential division and helical milling, with a 40:1 ratio and 0.015 mm concentricity.
Last updated: October 2026
Key Features
- Standard equipment: dividing head, tailstock, 3 dividing plates, centre point and driver, drive gear train from spindle to head and operating tools
- For direct, indirect and differential division
- For helical pattern milling, driven by gears and powered by table feed
- Phosphor bronze worm gear with a hardened and ground Cr-Ni steel worm
- Every division from 2 to 50, and divisions up to 380
- Ratio 40:1, adjustable, and can be disengaged for direct division
Technical Specifications
| Specification | Value |
|---|---|
| Type | Universal dividing head |
| Division methods | Direct, indirect and differential |
| Dividing plates | 3 |
| Worm gear | Phosphor bronze |
| Worm | Hardened and ground Cr-Ni steel |
| Divisions | Every division from 2 to 50, and divisions up to 380 |
| Ratio | 40:1, adjustable |
| Concentricity | 0.015 mm |
| Helical milling | Driven by gears, powered by table feed |
About This Product
A dividing head is fitted to a milling machine table to hold a workpiece and turn it through exact fractions of a revolution, so that equal divisions can be cut for gear teeth, splines, flutes and slots. A worm and worm gear with a 40:1 ratio, used with the dividing plates, give the fine steps. For helical work the head is geared to the table feed so that the workpiece turns as the table moves. Direct, indirect and differential division cover the range of division numbers.
Frequently Asked Questions
Q1. What division methods does the Universal Dividing Head support?
It is used for direct, indirect and differential division.
Q2. What are its ratio and concentricity?
The ratio is 40:1, adjustable, and the concentricity is 0.015 mm.
Q3. What is in the standard equipment?
The dividing head, tailstock, 3 dividing plates, centre point and driver, drive gear train from spindle to head, and operating tools.
Related: Engineering Equipment, Universal Milling Machine, Long Milling Arbor Set for Cutters, Short Milling Arbor Set for Cutters, Swiveling Machine Vice.
For a quotation on the Dividing Head Universal, contact School Lab Equipment India.