Universal Milling machine Manufacturer,Supplier and Exporter in India
Product Code : EL-EE-12191
Quick Answer: The Universal Milling Machine has a 1300 x 305 mm table with 3 T-slots, 950 mm longitudinal and 290 mm cross traverse, a horizontal spindle with a speed range of 40-3000 rpm and a vertical head that swivels ± 60 degrees, with vertical, universal, circular and rack milling attachments.
Last updated: October 2026
Key Features
- Table working surface 1300 x 305 mm with 3 T-slots, each 18 H7 mm wide
- Longitudinal traverse 950 mm and cross traverse 290 mm
- Horizontal milling spindle with a speed range of 40-3000 rpm
- Vertical milling spindle with 12 speeds and a vertical head that swivels ± 60 degrees
- 12 feeds: longitudinal and cross feed 20-900 mm/min, vertical feed 10-450 mm/min
- Vertical, universal, circular (with indexing device) and rack milling attachments, and a bevelled block
Technical Specifications
| Specification | Value |
|---|---|
| Table working surface | 1300 x 305 mm |
| T-slots | 3, width 18 H7 mm, spacing 63 mm |
| Longitudinal traverse | 950 mm |
| Cross traverse | 290 mm |
| Table swivel | 45 degrees |
| Horizontal spindle taper | Size 50 |
| Horizontal spindle speed range | 40-3000 rpm |
| Spindle centre to table | 455 mm |
| Spindle centre to ram | 145 mm |
| Number of feeds | 12 |
| Longitudinal and cross feed | 20-900 mm/min |
| Vertical feed | 10-450 mm/min |
| Rapid traverse, longitudinal and cross | 3000 mm/min |
| Rapid traverse, vertical | 1500 mm/min |
| Vertical spindle taper | Size 40 |
| Vertical spindle speeds | 12 |
| Vertical head swivel | ± 60 degrees |
| Operating supply | 3 hp, 50 Hz, 380 V |
About This Product
A universal milling machine removes metal with a rotating multi-tooth cutter while the workpiece is fed on a table that moves in three directions and can swivel. The horizontal spindle carries cutters on an arbor, and the swivelling vertical head is used for end milling and angled cuts. The circular milling attachment with indexing device lets work be divided into equal steps, and the rack milling attachment is used for cutting racks. Workshop students learn speed and feed selection and work holding on the T-slotted table. The Universal Milling Machine can be supplied and exported to buyers in Portugal, Mauritania, Belize, United Arab Emirates, Seychelles and Djibouti.
Frequently Asked Questions
Q1. What is the table size of the Universal Milling Machine?
The table working surface is 1300 x 305 mm, with 3 T-slots that are 18 H7 mm wide and 63 mm apart.
Q2. What speed and feed ranges does it have?
The horizontal spindle speed range is 40-3000 rpm. Longitudinal and cross feed is 20-900 mm/min and vertical feed is 10-450 mm/min.
Q3. Which attachments are listed?
Vertical milling, universal milling, circular milling with indexing device and rack milling attachments, plus a bevelled block.
Related: Engineering Equipment, Dividing Head Universal, Long Milling Arbor Set for Cutters, Short Milling Arbor Set for Cutters, Swiveling Machine Vice.
For a quotation on the Universal Milling Machine, contact School Lab Equipment India.