Crush Tester Manufacturer,Supplier and Exporter in India
Product Code : EL-PTE-13191
Quick Answer: The Crush Tester tests the buckling strength of fluting, flat crush and edge crush of corrugated fibreboard between two flat platens, one fixed and one moved by a motor-driven screw at constant speed, with the load shown on a digital indicator from a strain gauge load cell.
Last updated: October 2026
Key Features
- Tests the buckling strength (longitudinal) of fluting, flat crush and edge crush in corrugated fibreboard
- Corrugated crush, ring crush and pin adhesion tests possible with additional accessories on specific demand
- Two flat platens, one fixed and one moved by a screw driven through a motor and reduction gearbox at constant speed
- Load measured on a digital load indicator through a strain gauge type load cell
- Indicator shows the maximum load reached during the test
- Motor is stopped when the load reaches the maximum capacity of the load cell
Technical Specifications
| Specification | Value |
|---|---|
| Tests | Buckling strength of fluting, flat crush and edge crush of corrugated fibreboard |
| Optional tests | Corrugated crush, ring crush and pin adhesion, with additional accessories |
| Platens | Two flat platens, one fixed and one movable |
| Drive | Screw driven through motor and reduction gearbox, at constant speed |
| Load measurement | Strain gauge type load cell with digital load indicator |
| Indicator | Shows the maximum load and stops the motor at the load cell capacity |
About This Product
Corrugated fibreboard boxes must resist crushing when they are stacked and handled. Crush tests squeeze a small specimen between two flat platens at a constant speed and record the force. Flat crush loads the board face-on, edge crush loads a strip on its edge, and the buckling test checks the strength of the fluted layer. Ring crush and pin adhesion tests can be added with extra accessories. Students use the readings to compare boards and to see how structure gives strength. School Lab Equipment India supplies the Crush Tester across India and can export it to Kuwait, Qatar, Chad, Somalia and Suriname.
Frequently Asked Questions
Q1. What does the Crush Tester test?
It tests the buckling strength, longitudinal in fluting, and the flat crush and edge crush of corrugated fibreboard.
Q2. Can other tests be done?
Corrugated crush, ring crush and pin adhesion tests can be done with additional accessories, which are available on specific demand.
Q3. How is the load measured?
The load on the specimen between the platens is measured on a digital load indicator through a strain gauge type load cell, and the indicator shows the maximum load reached.
Related: Paper and Packaging Testing Equipment, Compression Strength Tester, Collapse Tester, Bursting Strength Tester, Elmendorf Tear Tester.
For a quotation on the Crush Tester, contact School Lab Equipment India.