Digital Compression Testing Machine Manufacturer,Supplier and Exporter in India
Product Code : EL-RTE-13246
Quick Answer: The Digital Compression Testing Machine is a 2000 kN (200 tons) capacity compression testing machine, electrically operated and fitted with a digital display, with a 200 ton hydraulic jack fixed to the base.
Last updated: October 2026
Key Features
- 2000 kN (200 tons) capacity, electrically operated, fitted with a digital display
- Hydraulic jack of 200 ton capacity fixed to the base
- Upper platen with self-aligning action, attached to a screw through the cross head for initial clearance adjustment
- Lower platen rests on the jack ram and is positioned with a centering pin; loading is by upward movement of the lower platen
- Suitable for operation on 440 V, 3 phase AC supply
- Cubes of 100, 150 and 200 mm and cylinders of 100 × 200 mm and 150 × 300 mm are listed
Technical Specifications
| Specification | Value |
|---|---|
| Capacity | 2000 kN (200 tons) |
| Ram travel | 50 mm |
| Pressure gauge diameter | 200 mm |
| Least count | 0.1 kN |
| Platen diameter | 300 mm |
| Horizontal clearance | 330 mm |
| Height of load frame | 1300 mm |
| Cube sizes | 100, 150 and 200 mm |
| Cylinder sizes | 100 × 200 mm and 150 × 300 mm |
| Motor | 440 V, 3 phase, 50 Hz, 950 r.p.m. |
About This Product
A compression testing machine loads a specimen between two platens until it fails, and the maximum load gives its compressive strength. In civil engineering laboratories it is used with concrete cubes and cylinders. The self-aligning upper platen helps spread the load evenly over the specimen, and the lower platen is pushed upward by the jack ram to apply the load, which is shown on the digital display. School Lab Equipment India can export the Digital Compression Testing Machine to education buyers in United States, Senegal, Somalia, Malta and South Africa.
Frequently Asked Questions
Q1. What is the capacity of the Digital Compression Testing Machine?
The capacity is 2000 kN (200 tons). It is electrically operated and fitted with a digital display.
Q2. Which specimen sizes are listed?
Cubes of 100, 150 and 200 mm, and cylinders of 100 × 200 mm and 150 × 300 mm.
Q3. What power supply does it need?
It is suitable for operation on a 440 V, 3 phase AC supply.
Related: Rubber Testing Equipment, Compression Set, Compressibility and Recovery Tester.
For a quotation on the Digital Compression Testing Machine, contact School Lab Equipment India.