Relative Density Test Manufacturer,Supplier and Exporter in India
Product Code : EL-STLE-13052
Quick Answer: The Relative Density Test equipment is a vibratory table with a cushioned steel deck of about 75 cm × 75 cm, supplied with 3000 ml and 15000 ml unit weight moulds, used to determine the relative density of cohesionless, free-draining soils.
Last updated: October 2026
Key Features
- Vibratory table with a cushioned steel vibrating deck of about 75 cm × 75 cm
- Frequency of approximately 3600 vibrations per minute under an 11.5 kg load
- Amplitude variable up to 0.65 mm in steps of 0.05 mm
- Cylindrical metal unit weight moulds of 3000 ml and 15000 ml capacity
- Guide sleeve with clamp assembly, surcharge base plate with handle, and surcharge weight
- Dial gauge of 0.01 mm × 50 mm travel with a 25 mm extension piece
Technical Specifications
| Specification | Value |
|---|---|
| Vibrating deck | Cushioned steel, about 75 cm × 75 cm |
| Frequency | Approximately 3600 vibrations per minute under an 11.5 kg load |
| Amplitude | Variable in steps of 0.05 mm: up to 0.25 mm, 0.25 to 0.45 mm and 0.45 to 0.65 mm |
| Power supply | 415 V, three phase |
| Moulds | Cylindrical metal unit weight moulds, 3000 ml and 15000 ml capacity |
| Mould fittings | Guide sleeve with clamp assembly; surcharge base plate with handle; surcharge weight |
| Dial gauge | 0.01 mm × 50 mm travel, with 25 mm extension piece |
About This Product
Relative density describes how closely a cohesionless soil, such as clean sand or gravel, is packed compared with its loosest and densest states. In this test the soil is placed in a metal mould, loaded with a surcharge and vibrated on the table to bring it to a dense state, and the change in height is read on a dial gauge. The values are then used to work out the relative density, which students use to classify granular soils as loose or dense. Alongside supply within India, the Relative Density Test Equipment is offered for export to Sri Lanka, Liberia, Central African Republic, Saint Lucia and Malawi.
Frequently Asked Questions
Q1. Which soils is the Relative Density Test equipment used for?
It is used to determine the relative density of cohesionless, free-draining soils.
Q2. Which mould sizes are included?
Cylindrical metal unit weight moulds of 3000 ml and 15000 ml capacity are listed.
Q3. What power supply does the vibratory table need?
It is suitable for a 415 V, three phase supply.
Related: Soil Testing Lab Equipment, Proctor Compaction Test Apparatus, Sand Pouring Cylinder, Pycnometers.
For a quotation on the Relative Density Test Equipment, contact School Lab Equipment India.