Spring Testing Machine Manufacturer,Supplier and Exporter in India
Product Code : EL-TE-13295
Quick Answer: The Spring Testing Machine, listed as hand-cum-electric operated, carries out load deflection tests on helical tension and compression springs, with a hydraulic unit in a cabinet, a Bourdon type gauge for direct load reading and a graduated upright for deflection.
Last updated: October 2026
Key Features
- For load deflection tests on tension and compression springs of helical pattern
- Hydraulic unit in the cabinet, with the pump hand wheel and release valve handle outside it
- Compact base with two fixed uprights and four horizontal plates
- Square threaded wheel arrangement for adjusting the height of the springs
- Bourdon type gauge for direct load measurement
- One fixed upright graduated for direct reading of deflection or tension, with a thimble and arrow mark
Technical Specifications
| Specification | Value |
|---|---|
| Spring types | Helical tension and compression springs |
| Load measurement | Bourdon type gauge, direct reading |
| Deflection reading | Graduated fixed upright with thimble and arrow mark |
| Scale graduations | Up to 15 cm |
| Tension capacity | 8 inch length, 1/2 inch dia rod, springs up to 4 inch dia |
| Compression capacity | 6 inch length, 1/2 inch dia rod, 4 inch springs |
| Height adjustment | Square threaded wheel arrangement |
About This Product
A spring testing machine applies a measured load to a spring and records how far the spring extends or compresses. Plotting load against deflection gives the stiffness of the spring, and springs of the same type can be compared with each other. Here the pump of the hydraulic unit applies the load, the Bourdon type gauge shows it directly and the graduated upright shows the deflection, so students can read both values without a separate instrument. School Lab Equipment India supplies the Spring Testing Machine across India and can export it to Albania, Mozambique, North Macedonia, Ecuador and Grenada.
Frequently Asked Questions
Q1. Which springs can the Spring Testing Machine test?
It is for load deflection tests on tension and compression springs of helical pattern.
Q2. How are load and deflection read?
A Bourdon type gauge is fixed for direct load measurement, and one fixed upright is graduated to show the deflection or tension of the springs, with a thimble and arrow mark to help in reading.
Q3. What spring sizes does it take?
It is listed for tension springs with an 8 inch length, 1/2 inch dia rod and up to 4 inch dia, and for compression springs with a 6 inch length, 1/2 inch dia rod and 4 inch springs.
Related: Testing Equipments, Crude Fiber Analyzer, Constant Temperature Refrigerated.
For a quotation on the Spring Testing Machine, contact School Lab Equipment India.