Vibration Tester For Transport Packages Manufacturer,Supplier and Exporter in India
Product Code : EL-PTE-13188
Quick Answer: The Vibration Tester for Transport Packages subjects a package to simulated transport vibration on a square horizontal table moved by an oscillating block driven by an electric motor, at a fixed 4 Hz or, in the variable frequency model, any value from 1 to 8 Hz, with a six-digit counter recording the oscillations.
Last updated: October 2026
Key Features
- Square horizontal table mounted above an oscillating block and rigidly connected to it
- Block held over two hardened and ground carbon steel rods, with two gunmetal bushes
- Electric motor with V-belt and speed reduction pulley; an eccentric pin and linkage convert rotary into linear movement
- Fixed frequency model at 4 Hz; variable frequency model from 1 to 8 Hz with an inverter drive
- Six-digit electronic counter with non-contact infrared sensor and memory backup, and a key-operated reset switch
- Low level guard along the table edge; the package can be rotated through 90° after every 25% of the total oscillations
Technical Specifications
| Specification | Value |
|---|---|
| Table | Square, horizontal, rigidly connected to the oscillating block |
| Drive | Electric motor, V-belt and speed reduction pulley, eccentric pin and linkage |
| Guide rods | Two hardened and ground carbon steel rods |
| Bushes | Two gunmetal bushes in the block |
| Fixed frequency model | 4 Hz |
| Variable frequency model | 1 to 8 Hz, with inverter drive supplied |
| Counter | Six digit electronic, non-contact infrared sensor, memory backup, key-operated reset |
| Safety | Low level guard along the periphery of the table |
About This Product
During transport, packages vibrate on vehicles, and this can damage the contents or the packaging. A vibration test imitates this by placing the package on a table that oscillates by a fixed amplitude at a fixed frequency. After a specified number or period of vibrations, the package and its contents are examined to judge how well the packaging resists vibration. Because the table is square, the package can be turned through 90° at set points in the test so that each side is exposed.
Frequently Asked Questions
Q1. What does the Vibration Tester for Transport Packages do?
It subjects a package to simulated vibration on a table that moves by a fixed amplitude at a fixed frequency, so the effect of transport vibration on the packed materials can be observed.
Q2. Which frequencies are available?
The fixed frequency model is set at 4 Hz. The variable frequency model can be set at any value from 1 to 8 Hz with the inverter drive supplied.
Q3. How are the oscillations counted?
A six-digit electronic counter with a non-contact infrared sensor records the total number of oscillations. It has memory backup in case of power loss and a key-operated reset switch.
Related: Paper and Packaging Testing Equipment, Compression Strength Tester, Crush Tester, Collapse Tester, Bursting Strength Tester.
For a quotation on the Vibration Tester for Transport Packages, contact School Lab Equipment India.